数控精密型平面铣床工件平面加工神器

The CNC plane milling machine has a compact mechanism and high degree of automation. It is mainly used for batch processing of upper and lower planes of plate parts such as mold blanks, especially for mold blanks, molds and other board processing industries. The machine tool has high precision and long service life; the scientifically equipped iron filing protection function can reduce iron filing spatter and improve safety performance.
?maintenance:
1. The electrical components in the electrical box and in the various parts of the machine tool should be kept clean and regularly checked. If abnormal conditions are found, they should be identified and repaired in time.
2. The parameters of the inverter should not be modified by non-professionals, otherwise it may cause a major accident such as a collision.
3. Before working every day, check the machine for abnormalities such as abnormal noise, if it is handled in time.
4. Every day after work, be sure to remove the chips, wipe all parts of the machine, and apply anti-rust oil on the work table.
5, the work must pay attention to the blade situation, the blade wear, must be replaced in time, otherwise it will affect the chamfer quality.
6. In order to ensure the function of the machine tool table, the work surface and the air nozzle should be taken care of.
7. The screw and guide rail should be added once every half month, and the hand pump should be used to raise the hand and distribute it to the corresponding screw and guide rail (this machine has a total of four oil drains) (see: use Explain the equipment maintenance of the diagram).
8. If the machine tool is damaged, it should be repaired immediately.
9. If the machine is working, if abnormal phenomena are found, stop the car immediately.
   该数控平面铣床机构紧凑，自动化程度高，主要用于批量加工模胚等板类零件的上下平面加工，尤其适用模胚、模具和其他板类加工行业。机床精度高，寿命长；科学配备的铁屑防护功能，可减少铁屑飞溅，提高安全性能。
 保养：
1、电气箱内及分装在机床各部位的电器组件，应保持清洁，定时检查，如发现有异常情况及时查明并维修。
2、变频器参数非专业人士不得进行修改，否则可能造成撞机等重大事故。
3、每天工作前，应检查机床有无异响等异常，如有及时处理。
4、每天工作完毕，一定要清除切屑，擦净机床各部分，工作台上涂上防锈油。
5、工作中必须注意刀片情况，刀片磨损, 须及时更换，否则会影响倒角质量。
6、为保证机床工作台的功能，应爱护工作台面及气嘴。
7、丝杆、导轨应每隔半个月加一次润滑油，用手扳动手摇泵进行加注，分布到相应的丝杆、导轨上（此机共四个油排）（详见：使用说明图解之设备保养）。
8、机床如有损坏，应立即检修。
9、机床工作时，如发现异常现象，应立即停车检查。
Jackie(at)